Output of Cisco show module command, How to do?
What do the Hw, Fw and Sw mean?
Why are these version numbers associated with the mac addresses and not associated/beside the modules in the slots?
Is Hw the hardware version? Can be upgraded?
Is Fw firmware version? Can be upgraded?
Is Sw software version? Same as IOS?
1#sh mod
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 2 Supervisor Engine 720 (Active) WS-SUP720-3B xxxxxxxxx
3 24 CEF720 24 port 1000mb SFP WS-X6724-SFP xxxxxxxxx
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 xxxxxxxxxxxx to xxxxxxxxxxxx 5.9 8.5(3) 12.2(18)SXF1 Ok
3 xxxxxxxxxxxx to xxxxxxxxxxxx 4.1 12.2(18r)S1 12.2(18)SXF1 Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 Policy Feature Card 3 WS-F6K-PFC3B xxxxxxxxxxxxxx 2.6 Ok
1 MSFC3 Daughterboard WS-SUP720 xxxxxxxxxxxxxx 4.0 Ok
3 Distributed Forwarding Card WS-F6700-DFC3B xxxxxxxxxxxxxx 4.8 Ok
Mod Online Diag Status
---- -------------------
1 Pass
3 Pass
The answer:
1 What do the Hw, Fw and Sw mean?
Hardware, Firmware and Software.
+
2 Why are these version numbers associated with the mac addresses and not
associated/beside the modules in the slots?
They aren't. That information is just being displayed on that line of the output.
3 Is Hw the hardware version? Can be upgraded?
The version of the card. Can't be upgraded.
4 Is Fw firmware version? Can be upgraded?
Some of the components on a linecard have onboard code. Sometimes, these can be upgraded.
5 Is Sw software version? Same as IOS?
Yes.
Cisco module 50% off or more for you on 3anetwork.com, WS-X4448-GB-SFP price, WS-X4748-RJ45V+E price.